-
WinCC_V11_Advance
- Ngày đăng: 27-09-2022
- Lượt xem: 352
WinCC_V11 is one of the application programs for HMI and Scada networks in civil as well as industrial sectors
-
TIA_PORTAL_V10.5 – Fastest and Lightest
- Ngày đăng: 27-09-2022
- Lượt xem: 351
TIA_PORTAL_V10.5 software is the first version of TIA_PORTAL released for 32bits operating system.
-
TIA PORTAL V12 – 64bits Fast Version
- Ngày đăng: 27-09-2022
- Lượt xem: 636
TIA PORTAL V12 is also the first version to support 64bits operating system and does not require high configuration computers, so for low-profile computer users can use this version smoothly.
-
HMI LÀ GÌ? PHÂN LOẠI, CẤU TẠO, ỨNG DỤNG VÀ HÃNG SẢN XUẤT
- Ngày đăng: 27-09-2022
- Lượt xem: 324
HMI là một từ rất quen thuộc đối với những người hoạt động trong ngành kỹ thuật, đặc biệt là trong các lĩnh vực điều khiển tự động hóa thông minh. Khi nhắc đến HMI thì chúng ta thường nghĩ đến nó như là một loại màn hình hiển thị có khả năng giao tiếp với các bộ điều khiển. Thật vậy, đó là những loại HMI hiện nay (tức là các dòng HMI hiện đại), tuy nhiên trước đó đã có tồn tại một loại HMI thô sơ hơn (tạm gọi là HMI truyền thống). Bài viết này, chúng tôi sẽ tập chung chia sẻ cho các bạn về loại HMI hiện đại, chúng ta cùng tìm hiểu lần lượt về HMI để hiểu rõ hơn nhé!
-
MR-Configurator “J2/J2S Mitsubishi Servo” Software
- Ngày đăng: 27-09-2022
- Lượt xem: 395
MR-Configurator software is software used to work with Mitsubishi engine MR-J2 / MR-J2S! Although this type of engine is no longer produced, many people still work with it! Its durability is really amazing ^^
-
MX OPC Server 6.10 Mitsubishi
- Ngày đăng: 27-09-2022
- Lượt xem: 714
MX OPC Server is a Mitsubishi I/O data access driver and Alarm/Event providing interface and communication protocol between Mitsubishi hardware and process control software. Integrated flexibility and ease of use: OLE for Process Control (OPC) V3.00
-
MR-Configurator2 V1.70
- Ngày đăng: 26-09-2022
- Lượt xem: 458
MR-Configurator2 Software Version 1.70Y is the latest version up to the present time, trying to support all of its latest Servo, you can see the picture below to see the list of Servo that the software can work okay
-
MC-WORX 9.2 “Mitsubishi SCADA Software”
- Ngày đăng: 26-09-2022
- Lượt xem: 489
MC WorX is SCADA software from Mitsubishi, which can monitor and operate the factory on a large scale. OPC support increases connectivity extensibility, refined interface for users to easily work. Graphic library 2D, 3D can combine with Symbol Factory to diversify design images.
-
GX-Works2 Mitsubishi PLC Software
- Ngày đăng: 26-09-2022
- Lượt xem: 468
GX-Works2 is a software upgraded and replaced by Mitsubishi for GX Developer with a nicer visual interface, smooth operation and support for other programming languages such as FBD
-
GX-Developer “Mitsubishi PLC” Software
- Ngày đăng: 26-09-2022
- Lượt xem: 438
GX-Developer Software V8.91 is Mitsubishi PLC programming software for FX series
-
GT-Designer V1.217B / GT-Works3
- Ngày đăng: 26-09-2022
- Lượt xem: 439
GT-Works3 V1.217 (GT-Designer3 V1.217) is the latest Mitsubishi HMI design software to date. It supports the design of all older HMI Series such as GOT1000 and newer like GOT2000 and GS-2000. You just need to download and install it to run immediately, do not need as many upgrade steps as the older versions
-
GX-Works3 V1.308Q Mitsubishi FULL
- Ngày đăng: 26-09-2022
- Lượt xem: 658
GX Works2 and GX Works3 software are alternative versions of Mitsubishi Developer PLC programmable PLC Mitsubishi FX1N, FX2N FX3G, FX3U FX5U, PLC PLC cpu, Q cpu … Generally all Mitsubishi PLC series. .
Tìm được 91 bài viết
, từ khóa " HMI "